The Red Hat Certified Specialist in Developing Automation with Ansible Automation Platform exam will be of interest to anyone seeking to demonstrate a broader knowledge and understanding of Ansible best practices, applying Ansible in larger and more complex projects, and using Ansible automation controller and Ansible automation hub including: ...

Study points for the exam Use Red Hat Ansible ® engine Install Red Hat Ansible engine on a control node. Configure managed nodes. Configure simple inventories. Perform basic management of systems. Run a provided playbook against specified nodes. Configure intrusion detection Install AIDE. Configure AIDE to monitor critical system files. Configure encrypted storage Encrypt and decrypt block devices using LUKS. Configure encrypted storage persistence using NBDE. Change encrypted storage passphrases. Restrict USB devices Install USBGuard. Write device policy rules with specific criteria to manage devices. Manage administrative policy and daemon configuration. Manage system login security using pluggable authentication modules (PAMs) Configure password quality requirements. Configure failed login polic * for this exam These audiences may be interested in becoming a Red Hat Certified Specialist in Security: Linux: System administrators responsible for managing large enterprise environments System administrators responsible for securing their organization s infrastructure Red Hat Certified engineers interested in pursuing the Red Hat Certified Architect (RHCA) credential Prerequisites for this exam Be a Red Hat Certified System Administrator or have comparable work experience and skills (Red Hat Certified engineer would be even better) Review the Red Hat Certified Specialist in Security: Linux exam objectives or have comparable work experience using Red Hat OpenStack Platform. Study points for the exam Use Red Hat Ansible ® engine Install Red Hat Ansible engine on a control node. Configure managed nodes. Configure simple inventories. Perform basic management of systems. Run a provided playbook against specified nodes. Configure intrusion detection Install AIDE. Configure AIDE to monitor critical system files. Configure encrypted storage Encrypt and decrypt block devices using LUKS. Configure encrypted storage persistence using NBDE. Change encrypted storage passphrases. Restrict USB devices Install USBGuard. Write device policy rules with specific criteria to manage devices. Manage administrative policy and daemon configuration. Manage system login security using pluggable authentication modules (PAMs) Configure password quality requirements. Configure failed login policy. Modify PAM configuration files and parameters. Configure system auditing Write rules to log auditable events. Enable prepackaged rules. Produce audit reports. Configure SELinux Enable SELinux on a host running a simple application. Interpret SELinux violations and determine remedial action. Restrict user activity with SELinux user mappings. Analyze and correct existing SELinux configurations. Enforce security compliance Install OpenSCAP and Workbench. Use OpenSCAP and Red Hat Insights to scan hosts for security compliance. Use OpenSCAP Workbench to tailor policy. Use OpenSCAP Workbench to scan an individual host for security compliance. Use Red Hat Satellite server to implement an OpenSCAP policy. Apply OpenSCAP remediation scripts to hosts. As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Prerequisites Be a Red Hat Certified System Administrator or have comparable work experience and skills (Red Hat Certified engineer would be even better) Review the Red Hat Certified Specialist in Security: Linux e ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as Performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind C * Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning An RHCE interested in earning Red Hat Certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as Performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind Configure systems to run SystemTap scripts Alter process priorities of both new and existing processes Configure systems to support alternate page sizes for applications that use large amounts of memory Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I - O scheduling algorithm selection, file system layout and others Configure kernel behavior by altering module parameters Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations Select and configure tuned profiles Manage system resource usage using control groups As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Red Hat recommends that candidates ea> Red Hat Certified System Administrator (RHCSA) or Red Hat Certified engineer (RHCE) before attempting this exam but neither is required. Exam candidates should: Be a Red Hat Certified System Administrator (RHCSA) or have comparable work experience and skills (RHCE would be eve ...

Network administrators and infrastructure engineers who want to demonstrate skill in using Ansible automation to configure and manage network devices Prerequisites Experience with network administration and an understanding of basic concepts of networking, routing and switch outer configuration Familiarity with command line management of ne ...

The Red Hat Certified Specialist in Managing Automation with Ansible Automation Platform exam will be of interest to anyone seeking to demonstrate knowledge and understanding of managing large and complex projects and using Ansible automation controller and Ansible automation hub including: Experienced Linux system administrators DevOps eng ...

Study points for the exam Red Hat Preliminary Exam in System Administration I (PE124) candidates should be able to accomplish the tasks below without assistance. These have been grouped into several categories. Understand and use essential tools Access a shell prompt and issue commands with correct syntax Use input-output redirection (>, >>, |, 2>, etc.) Access remote systems using SSH Log in and switch users in multi-user targets Archive, compress, unpack, and uncompress files using tar, star, gzip, and bzip2 Create and edit text files Create, delete, copy, and move files and directories Create hard and soft links List, set, and change standard ugo wx permissions Locate, read, and use system documentation including man, info, and files in - usr - share - doc Operate running systems Boot, reboot, and shut down a system normally Boot systems into different targets manually Identify CP * Experienced or novice Red Hat Enterprise Linux system administrators seeking validation of their skills Students who have attended Red Hat System Administration I (RH124) and are on the path to becoming an RHCSA IT professionals who are on the path to becoming a Red Hat Certified engineer (RHCE) Study points for the exam Red Hat Preliminary Exam in System Administration I (PE124) candidates should be able to accomplish the tasks below without assistance. These have been grouped into several categories. Understand and use essential tools Access a shell prompt and issue commands with correct syntax Use input-output redirection (>, >>, |, 2>, etc.) Access remote systems using SSH Log in and switch users in multi-user targets Archive, compress, unpack, and uncompress files using tar, star, gzip, and bzip2 Create and edit text files Create, delete, copy, and move files and directories Create hard and soft links List, set, and change standard ugo wx permissions Locate, read, and use system documentation including man, info, and files in - usr - share - doc Operate running systems Boot, reboot, and shut down a system normally Boot systems into different targets manually Identify CPU - memory intensive processes and kill processes Locate and interpret system log files and journals Preserve system journals Start, stop, and check the status of network services Securely transfer files between systems Create and configure file systems Create and configure set-GID directories for collaboration Diagnose and correct file permission problems Manually mount and unmount existing filesystem Deploy, configure, and maintain systems Start and stop services and configure services to start automatically at boot Configure systems to boot into a specific target automatically Configure time service clients Install and update software packages from Red Hat Network, a remote repository, or from the local file system Work with package module streams Modify the system bootloader Manage basic networking Configure IPv4 and IPv6 addresses Configure hostname resolution Configure network services to start automatically at boot Manage users and groups Create, delete, and modify local user accounts Change passwords and adjust password aging for local user accounts Create, delete, and modify local groups and group memberships Configure superuser access As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Prerequisites for this exam Have either taken Red Hat System Administration I (RH124) or have comparable work experience as a system administrator on Red Hat Enterprise Linux ...

This course will help prepare your staff to be ready for Red Hat Enterprise Linux 8 from day one, giving your organization a preview of the changes in the core Red Hat Enterprise Linux operating system used by the applications, services, and other infrastructure in your data center. This preview will allow you to more effectively plan upgrades to and the rollout of Red Hat Enterprise Linux 8, and prepare you to quickly take advantage of new features and changes for your business and your use cas ...

This course teaches you skills on the most requested Red Hat Identity Management (IdM) capabilities, including Active Directory trusts, multi-product federation, configuration management with Ansible, integrated certificate management, single sign-on, one-time passwords, and cybersecurity policy conformance. Audience Red Hat Certified System Administrator (RHCSA) who wants to lea> how to provision and configure IdM technologies across both Linux and Windows applications Identi ...

VMware vSphere: What s New [V8] * V tomto dvoudenním kurzu se seznámíte s novými funkcemi a vylepšeními VMware vCenter Server 8.0 a VMware ESXi 8.0. Scénáře reálného použití, praktická laboratorní cvičení a přednášky Vás naučí dovednostem, které potřebujete k efektivní implementaci a konfiguraci Vmware vSphere 8.0. ...

This course is based on Red Hat OpenShift Serverless 1.23 and OpenShift Container Platform 4.10. Course content summary Understand OpenShift Serverless architecture and primary features of Knative for serverless applications. Implement cloud-native serverless applications using Knative serving. Implement event-driven serverless applications using Knative eventing. Implement serverless applications using OpenShift Serverless functions. Complete ...

Tento kurz slouží jako vstupní brána do světa neuronových sítí, zpracování obrázků a textu pomocí machine learning. Naučíte se, co jsou neurové sítě, jak vznikly, jak fungují a jak se trénují. Na konci kurzu budete umět vytrénovat vlastní neuronovou síť pomocí knihovny scikit-learn. Neuronové sítě jsou často používané při počítačovém vidění a zpracování přirozeného jazyka. Naučíte se, jak s obrázky pracovat pomocí knihovny OpenCV. Pochopíte myšlenku za konvoluční neuronovou sítí, která je využív ...