Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. red hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind C * Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning An RHCE interested in earning red hat certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. red hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind Configure systems to run SystemTap scripts Alter process priorities of both new and existing processes Configure systems to support alternate page sizes for applications that use large amounts of memory Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I - O scheduling algorithm selection, file system layout and others Configure kernel behavior by altering module parameters Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations Select and configure tuned profiles Manage system resource usage using control groups As with all red hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from red hat certification Central. red hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. exam results are reported as section scores. red hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites red hat recommends that candidates ea> red hat certified System Administrator (RHCSA) or red hat certified Engineer (RHCE) before attempting this exam but neither is required. exam candidates should: Be a red hat certified System Administrator (RHCSA) or have comparable work experience and skills (RHCE would be eve ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. red hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind * Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning An RHCE interested in earning red hat certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. red hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind Configure systems to run SystemTap scripts Alter process priorities of both new and existing processes Configure systems to support alternate page sizes for applications that use large amounts of memory Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I - O scheduling algorithm selection, file system layout and others Configure kernel behavior by altering module parameters Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations Select and configure tuned profiles Manage system resource usage using control groups As with all red hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from red hat certification Central. red hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. exam results are reported as section scores. red hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites red hat recommends that candidates ea> red hat certified System Administrator (RHCSA) or red hat certified Engineer (RHCE) before attempting this exam but neither is required. exam candidates should: Be a red hat certified System Administrator (RHCSA) or have comparable work experience and s ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. red hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind C * Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning An RHCE interested in earning red hat certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. red hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind Configure systems to run SystemTap scripts Alter process priorities of both new and existing processes Configure systems to support alternate page sizes for applications that use large amounts of memory Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I - O scheduling algorithm selection, file system layout and others Configure kernel behavior by altering module parameters Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations Select and configure tuned profiles Manage system resource usage using control groups As with all red hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from red hat certification Central. red hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. exam results are reported as section scores. red hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites red hat recommends that candidates ea> red hat certified System Administrator (RHCSA) or red hat certified Engineer (RHCE) before attempting this exam but neither is required. exam candidates should: Be a red hat certified System Administrator (RHCSA) or have comparable work experience and skills (RHCE would be eve ...

Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. red hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind * Experienced Linux system administrators responsible for maximizing resource utilization through performance tuning An RHCE interested in earning red hat certified Architect (RHCA) Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. red hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below: Use utilities such as vmstat, iostat, mpstat, sar, gnome-system-monitor, top, powertop and others to analyze and report system and application behavior Configure systems to provide performance metrics using utilities such as performance Co-Pilot (PCP) Use the Pluggable Authentication Modules (PAM) mechanism to implement restrictions on critical system resources Use - proc - sys, sysctl and - sys to examine and modify and set kernel run-time parameters Use utilities such as dmesg, dmidecode, x86info, sosreport etc. to profile system hardware configurations Analyze system and application behavior using tools such as ps, strace, top and Valgrind Configure systems to run SystemTap scripts Alter process priorities of both new and existing processes Configure systems to support alternate page sizes for applications that use large amounts of memory Given multiple versions of applications that perform the same or similar tasks, choose which version of the application to run on a system based on its observed performance characteristics Configure disk subsystems for optimal performance using mechanisms such as swap partition placement, I - O scheduling algorithm selection, file system layout and others Configure kernel behavior by altering module parameters Calculate network buffer sizes based on known quantities such as bandwidth and round-trip time and set system buffer sizes based on those calculations Select and configure tuned profiles Manage system resource usage using control groups As with all red hat performance-based exams, configurations must persist after reboot without intervention. Scores and reporting Official scores for exams come exclusively from red hat certification Central. red hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. exam results are reported as section scores. red hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites red hat recommends that candidates ea> red hat certified System Administrator (RHCSA) or red hat certified Engineer (RHCE) before attempting this exam but neither is required. exam candidates should: Be a red hat certified System Administrator (RHCSA) or have comparable work experience and s ...

The following audiences may be interested in earning the red hat certified specialist in Messaging Administration Systems administrators responsible for implementing enterprise messaging systems using red hat JBoss AMQ Systems architects designing and managing applications that use enterprise messaging systems based on red hat JBoss AMQ Pr ...

Study points for the exam You should be able to accomplish the following grouped tasks without assistance: Understand and use Git Clone a Git repository Update, modify and create files in a Git repository Add those modified files back into the Git repository Manage inventory variables Structure host and group variables using multiple files per host or group Use special variables to override the host, port, or remote user Ansible uses for a specific host Set up directories containing multiple host variable files for some of your managed hosts Override the name used in the inventory file with a different name or IP address Manage task execution Control privilege execution Run selected tasks Transform data with filters and plugins Populate variables with data from external sources using lookup plugins * The red hat certified specialist in Advanced Automation: Ansible Best Practices exam will be of interest to anyone seeking to demonstrate a broader knowledge and understanding of Ansible best practices, applying Ansible in larger and more complex projects, and using Ansible Tower, including those in these roles: Experienced Linux system administrators DevOps engineers Cloud administrators Other IT professionals Study points for the exam You should be able to accomplish the following grouped tasks without assistance: Understand and use Git Clone a Git repository Update, modify and create files in a Git repository Add those modified files back into the Git repository Manage inventory variables Structure host and group variables using multiple files per host or group Use special variables to override the host, port, or remote user Ansible uses for a specific host Set up directories containing multiple host variable files for some of your managed hosts Override the name used in the inventory file with a different name or IP address Manage task execution Control privilege execution Run selected tasks Transform data with filters and plugins Populate variables with data from external sources using lookup plugins Use lookup and query functions to template data from external sources into playbooks and deployed template files Implement loops using structures other than simple lists using lookup plugins and filters Inspect, validate, and manipulate variables containing networking information with filters Delegate tasks Run a task for a managed host on a different host, then control whether facts gathered by that task are delegated to the managed host or the other host Install Ansible Tower Perform basic configuration of Ansible Tower after configuration Manage access for Ansible Tower Create Ansible Tower users and teams and make associations of one to the other Manage inventories and credentials Manage advanced inventories Create a dynamic inventory from an identity management server or a database server Create machine credentials to access inventory hosts Create a source control credential Manage projects Create a job template Manage job workflows Create a job workflow template Work with the Ansible Tower API Write an API scriptlet to launch a job Back up Ansible Tower Back up an instance of Ansible Tower As with all red hat performance-based exams, config ...

The red hat Enterprise performance tuning with exam (RH443) bundle is a combination of the following: red hat Enterprise performance tuning (RH442) course red hat certified specialist in performance tuning exam (ex442) ...

The red hat Enterprise performance tuning with exam (RH443) bundle is a combination of the following: red hat performance tuning: Linux in Physical, Virtual, and Cloud (RH442) red hat certified specialist in performance tuning exam (ex442) ...

Study points for the exam red hat reserves the right to add, modify, and remove objectives. Such changes will be made public in advance through revisions to this document. Candidates for the RHCSA in red hat OpenStack should be able to perform the following tasks: Install and configure red hat Enterprise Linux OpenStack Platform Manage users Manage projects Manage flavors Manage roles Set quotas Manage images Configure images at instantiation Add additional compute nodes Manage Swift storage Manage networking Manage Cinder storage * System administrators who want to demonstrate their use of red hat Enterprise Linux OpenStack Platform skills. red hat certified Engineers (RHcE) who wish to pursue red hat certified Architect (RHCA). Study points for the exam red hat reserves the right to add, modify, and remove objectives. Such changes will be made public in advance through revisions to this document. Candidates for the RHCSA in red hat OpenStack should be able to perform the following tasks: Install and configure red hat Enterprise Linux OpenStack Platform Manage users Manage projects Manage flavors Manage roles Set quotas Manage images Configure images at instantiation Add additional compute nodes Manage Swift storage Manage networking Manage Cinder storage Scores and reporting Official scores for exams come exclusively from red hat certification Central. red hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. exam results are reported as section scores. red hat does not report performance on individual items, nor will it provide additional information upon request. Prerequisites Be RHCSA or have comparable work experience and skills (RHcE would be even better). Have taken the red hat OpenStack Administration (CL210) course or have comparable work experience using red hat Enterprise Linux OpenStack Platform. Review the RHCSA in red hat OpenStack exam (EX210) objectives. Recommended courses CL210 - red hat OpenStack Administration II: Infrastructure Configuration for Cloud Administrators ...

for this exam The following audiences may be interested in earning the red hat certified Engineer in red hat OpenStack: Experienced OpenStack system administrators responsible for the planning or deployment of red hat Ceph Storage as a back end for OpenStack An RHCSA in red hat OpenStack interested in earning a red hat certified Engineer (R ...